Solids(立体)の英語の名前のまとめ
こんにちは。 ゆうです。
この記事では、Solids(立体)に関する英語表現について説明します。
基本のSolids(立体)
まず、基本の立体の名前を紹介します。
Name of Solid (立体の名前) | 日本語 |
Box | 柱 |
Cube | 立方体、正六面体 |
Polyhedron | 多面体 |
Regular polyhedron | 正多面体 |
Prism | 角柱 |
Cylinder,Column | 円柱 |
Pyramid | 角錐 |
Cone | 円錐 |
Sphere | 球 |
Hemisphere | 半球 |
Solids(立体)に使う一般的な用語
ここでは、Box(柱)を用いて一般的な用語を示します。基本用語
Length:長さ
Width:幅
Height:高さ
Vertex(単数), Vertices(複数),Corner :頂点
Side:辺
Face:面
Cross-section:断面
Base:底面 Side:側面
Volume:体積、記号として、大文字のVが用いられることが多いです。
Surface area:表面積、記号として、大文字のSが用いられることが多いです。
Polyhedron(多面体)
多面体は、Polyhedronと言います。複数形は、Polyhedrons または Polyhedraと言います。 Math is Funによると、A polyhedron is a solid with flat faces.(筆者訳)多面体は、平面を有する立方体である。
一般的なPolyhedron(多面体)
一般的なPolyhedronは、3つの種類があります。・Regular Polyhedron(正多面体),Platonic solid(プラトン立体)
・Prism(角柱)
・Pyramid(角錐)
つぎに、それぞれについて説明します。
Regular Polyhedron(正多面体)
正多面体は、Regular Polyhedronと言います。なお、正多面体は、Platonic solid(プラトン立体)とも言います。 Regular Polyhedronは、5種類ですので、ぜひ単語を覚えてみてください。Mathematical Term (数学用語) | 日本語 |
Tetrahedron | 四面体 |
Cube | 立方体、正六面体 |
Octahedron | 八面体 |
Dodecahedron | 十二面体 |
Icosahedron | 二十面体 |
Cube(立方体、正六面体)
Cubeは立方体、正六面体です。Cubeは、Regular Hexahedron(正六面体)とも言います。Hexa-は、6という意味です。
Volume(体積):
$${V=e^{3}}$$
Surface Area(表面積):
$${S=6\times e^{2}}$$
Prism(角柱)
角柱をPrismと言います。 Prismの底面は、Baseといい、高さは、Heightと言います。この図は、Triangular Prismです。 Prismには、例えば、以下のようなものがあります。
Mathematical Term(数学用語) | 日本語 |
Triangular prism | 三角柱 |
Cube | 正六面体 |
Square prism,Box | 四角柱 |
Pentagonal prism | 五角柱 |
ここでは、Square prismについて詳細に説明します。
Square Prism, Box(四角柱)
Boxは、Square prismで、四角柱です。Volume(体積):
$${V=l\times w \times h}$$
Surface Area(表面積):
$${SA=2lw+2lh+2wh}$$
Diagonal(対角線):
$${d=\sqrt{l^{2}+w^{2}+h^{2}}}$$
Pyramid(角錐)
角錐は、Pyramidと言います。 Pyramidには、例えば、以下のようなものがあります。Mathematical Term (数学用語) | 日本語 |
Triangular Pyramid | 三角錐 |
Square Pyramid | 四角錐 |
Pentagonal Pyramid | 五角錐 |
基本的な用語
Regular square pyramid(正四角錐)を使ってPyramid(角錐)の基本的な用語について説明します。
Apex:頂点 Base:底面 Height:高さ Slant Height:斜高
Regular square pyramid(正四角錐)
ここでは、Regular square pyramid(正四角錐)についての体積や表面積を示します。 Regular square pyramidは、底面が正方形で、直錐です。Volume(体積):
$${V=\frac{1}{3}a^{2}h}$$
このaの2乗は、Base of Surface(底面積)です。
Surface Area(表面積):
$${SA=a^{2}+4al}$$
aの2乗は、Base Area(底面積)で、alは、Lateral Area(側面積)で、。
Non-polyhedron(非多面体)
非多面体は、Non-polyhedronと言います。 Non-polyhedronには、以下のような立体があります。・Cylinder(円柱)
・Cone(円錐)
・Sphere(球)
・Torus(円環)、ドーナツ型のことです。
ここでは、Accuplacerテストなどで出題されそうな、Cylinder, Cone, Sphereについて説明します。
Cylinder, Column(円柱)
円柱のことを、CylinderもしくはColumnと言います。半径は、Radiusと言い、複数形は、Radiiです。
高さは、Height、底面は、Baseである。
Volume(体積):
$${V=\pi r^{2}h}$$
Surface Area(表面積):
$${SA=2\pi r^{2}+2\pi rh}$$
Cone(円錐)
円錐をConeと言います。円錐に関する用語
Slant Height:斜高
Radius、Radii(複数形):半径
Height:高さ
Apex:頂点
Base:底面
Volume(体積):
$${V=\frac{1}{3}\pi r^{2}h}$$
Slant Height(斜高):
$${l=\sqrt{r^{2}+h^{2}}}$$
Surface Area(表面積):
$${SA=\pi r(r+l)}$$
Sphere(球)
球は、Sphereと言います。 半径は、Radiusで、複数系は、Radiiです。Volume(体積):
$${V=\frac{4}{3}\pi r^{3}}$$
Surface Area(表面積):
$${SA=4\pi r^{2}}$$
また、半球は、Hemisphereと言います。